Relationship between insert products and mold structure


The product use requirements can be divided into performance requirements and appearance quality (decoration and matching requirements), of which the appearance quality is directly related to the mold structure.

The relationship between the use requirements of simple skeleton products and the mold structure: For example, the shape of skeleton products is relatively simple, but due to the matching requirements in use, the surface of the embedded parts in the products is not allowed to have rubber edge or flash bonding, which brings certain difficulties to the mold structure design, because the rubber is all pervasive in the process of pressurization and heating vulcanization. Some experiments have shown that when the fit clearance in the mold is less than or equal to 0.01, rubber can also be occupied, thus causing product flash. Therefore, the mold designer should understand the vulcanization process and surface treatment method of rubber skeleton products, so as to take various targeted measures to ensure the appearance requirements of the above products.

The skeleton products with high requirements mainly refer to the high assembly requirements or appearance requirements for the inserts. The outer diameter of the skeleton is required to fit the size. It is also a thin-walled skeleton, which is easy to deform; In addition, adhesive layer bonding and deformation are not allowed on the K side. There are two methods for mold design: the first method can adopt the injection mold or extrusion mold structure of first clamping and then feeding, which is characterized by that the framework is preferentially fitted during the injection or extrusion process of the mold,

The positioning and removal method of inserts and moulds shall be based on the shape of inserts, the direction of glue pressing and the difficulty of removal. The positioning of inserts is related to the quality of products and the service life of moulds; The removal of the insert affects the opening and closing of the mold, which is the key to the work efficiency. Attention shall be paid during operation: if the positioning method of glue wrapping is adopted, it must be noted that the positioning shall be uniform from top to bottom and around. The inlay method shall ensure the consistency of the thickness of the rubber block (strip), which is the correlation between good and bad coaxiality of the intermediate framework.

Related news


A Brief Talk on the Causes of the Tooth Fracture of the Synchronous Belt

The failure of synchronous belt pulley is mainly caused by the failure of gear teeth. The failure forms of gear teeth are various, and one of the common surface forms is gear tooth fracture. For this phenomenon, the manufacturer needs to take measures to improve the pulley. This article will introduce the causes of the synchronous belt gear tooth fracture:


How to maintain gears

The effect of different gears is different, and naturally there will be many quality problems. Therefore, daily maintenance can effectively prevent pitting, wear, adhesion and plastic deformation of gears. During the operation of the gear, if the gear is completely exposed, it is easy to fall into the sand and debris, and good lubrication cannot be guaranteed.


What should be paid attention to the length of gear service time?

As a key component of mechanical equipment, the performance of gear is more important, and it plays a decisive role in mechanical equipment. Its service life also affects the economy. What problems should be paid attention to in order to prolong the service life of mechanical gears.


Working Principle and Winding Method of Automatic Outer Rotor Winding Machine

The production process of brushless DC motor can not be separated from the stator winding process. Generally, the selected winding machine equipment is different according to the stator shape, size, slot direction and winding method.


What role does the car counterweight have for the car?

In fact, do you pay attention to this problem when you drive normally? That is, there are some balance weights on the car tires. These balance weights are designed to help people balance better when driving at high speeds. If the weights of the four tire plates are different, the steering wheel will shake when driving at high speeds.


Advantages and Disadvantages of Insert Injection Molding

The combination and supplement of the plasticity and elasticity of plastic and the rigidity, strength and heat resistance of metal can firmly make complex and exquisite metal plastic integrated products; Reduce the size and weight of products;