What role does the car counterweight have for the car?


In fact, do you pay attention to this problem when you drive normally? That is, there are some balance weights on the car tires. These balance weights are designed to help people balance better when driving at high speeds. If the weights of the four tire plates are different, the steering wheel will shake when driving at high speeds. So if this happens to your car while driving, you need to go to the repair shop to do dynamic balancing.

In fact, many people think that these counterweights can be attached at will. In fact, these counterweights need to be rotated on the instrument before they know how much they should be attached. Dynamic balancing is usually done once after the car has repaired and replaced the tire. Because the weight of the tire after the tire has been repaired and replaced will change at this time, so it is necessary to change the tire weight. If there is a heavy proportion, Then it is necessary to re assign the counterweight to the non matching, and finally re allocate the tire counterweight according to the data feedback.

The old cars used to put the counterweights outside, and all the counterweights were on the edge of the wheel hub, but the counterweights were easy to fall off, so the new cars put the counterweights inside the wheel hub, which not only makes the wheel hub look better, but also won't fall off because of some road conditions, In this way, the vehicle performance can be well prevented from being affected by the falling of the counterweight.

In general, the counterweights of automobile tires are very important. They play a great role in driving safety, although they seem to have little effect. But these things can help us drive more safely. At the beginning, a netizen encountered such a problem when driving. At that time, his speed was about 120 km, but the steering wheel would shake obviously. At that time, he thought it was a problem with the car suspension. Finally, when he checked in the repair shop, he found that he had forgotten the left front wheel when doing dynamic balancing, So after the counterweight was added, there was no such problem.

In fact, we really can't underestimate the small parts on the car. Sometimes they are very useful. After all, cars are different from motorcycles. Motorcycles can still be used without a few small parts. However, if a car lacks one or two small parts, you really don't know what potential safety hazards will be. So you should maintain your car more often. You must remember to do dynamic balancing after changing the tires. If it's replacing the bottom tie rod ball joint of the car for shock absorption, you should remember to do a four-wheel alignment.

Related news


A Brief Talk on the Causes of the Tooth Fracture of the Synchronous Belt

The failure of synchronous belt pulley is mainly caused by the failure of gear teeth. The failure forms of gear teeth are various, and one of the common surface forms is gear tooth fracture. For this phenomenon, the manufacturer needs to take measures to improve the pulley. This article will introduce the causes of the synchronous belt gear tooth fracture:


How to maintain gears

The effect of different gears is different, and naturally there will be many quality problems. Therefore, daily maintenance can effectively prevent pitting, wear, adhesion and plastic deformation of gears. During the operation of the gear, if the gear is completely exposed, it is easy to fall into the sand and debris, and good lubrication cannot be guaranteed.


What should be paid attention to the length of gear service time?

As a key component of mechanical equipment, the performance of gear is more important, and it plays a decisive role in mechanical equipment. Its service life also affects the economy. What problems should be paid attention to in order to prolong the service life of mechanical gears.


Working Principle and Winding Method of Automatic Outer Rotor Winding Machine

The production process of brushless DC motor can not be separated from the stator winding process. Generally, the selected winding machine equipment is different according to the stator shape, size, slot direction and winding method.


What role does the car counterweight have for the car?

In fact, do you pay attention to this problem when you drive normally? That is, there are some balance weights on the car tires. These balance weights are designed to help people balance better when driving at high speeds. If the weights of the four tire plates are different, the steering wheel will shake when driving at high speeds.


Advantages and Disadvantages of Insert Injection Molding

The combination and supplement of the plasticity and elasticity of plastic and the rigidity, strength and heat resistance of metal can firmly make complex and exquisite metal plastic integrated products; Reduce the size and weight of products;